Sizing Guide

If you are unsure of what Hitch-Switch cover size you need, follow the steps provided below!

Measurement Option 1: Measure Using a Ruler or Tape Measure

Step 1: Measure the width of the inside of the hitch receiver on your vehicle, as shown in the image below.

Step 2: Use this dimension to purchase the correct Hitch-Switch cover size for your vehicle. Use the following links for your hitch size: 1.25" | 2" | 2.5"

Measurement Option 2: Measure Using a Dollar Bill (a 5, 10, 20, or 100 would work as well)

Step 1: Fold your dollar bill according to the image guides below. Then, use the dollar bill to measure the width of the inside of the hitch receiver on your vehicle, as shown in the image from Measurement Option 1.

Step 2: Use the guidance provided in the images below to purchase the correct Hitch-Switch cover size for your vehicle. Use the following links for your hitch size: 1.25" | 2" | 2.5"

Fold the bill in half (short side). If this nearly fits, select the 1.25" Hitch-Switch cover.

Fold your bill in thirds (long side). If this nearly fits, select the 2" Hitch-Switch cover.

Use the short side of your unfolded bill. If this nearly fits, select the 2.5" Hitch-Switch cover.